Material

PP (Polypropylene) Has The Characteristics Of Low Melting Temperature And Good Fluidity. It Can Quickly Fill Molds And Shorten The Production Cycle, M

PTFE(Polytetrafluoroethylene) Has Extremely Poor Fluidity At High Temperatures And Is Not Easy To Melt. It Requires Special Processes Such As Pre-Pres

PPS Has The Characteristics Of High Temperature Resistance, Good Fluidity And Dimensional Stability In Injection Molding. High-Temperature Molds Are R

PPO(Polyphenylene Ether) Has High Heat Resistance, Low Shrinkage And Excellent Dimensional Stability In Injection Molding, And Is Suitable For Precisi

LCP (Liquid Crystal Polymer) Has Excellent Fluidity And Low Melt Viscosity, Can Efficiently Fill Complex Thin-Walled Structures, Has A Short Molding C

PET Is Crystalline, Hygroscopic And Temperature Sensitive. Since Pet Is Hygroscopic, The Raw Materials Need To Be Strictly Dried Before Molding To Avo

PBT (Polybutylene Terephthalate) Has The Characteristics Of Rapid Crystallization, Short Molding Cycle, And Excellent Melt Fluidity, Which Is Suitable

PPA (Polyphthalamide) Is A High-Performance Engineering Plastic, Commonly Used To Manufacture Precision Parts That Require High Temperature Resistance

PEI(Polyetherimide), Commercially Known As Ultem, Is A High-Performance Engineering Plastic Widely Used In The Field Of Injection Molding.

PPSU (Polyphenylene Sulfone) Is A High-Strength Engineering Plastic That Is Resistant To High Temperatures And Corrosion, And Is Often Used For Inject

The Biggest Feature Of HDPE In Injection Molding Is Its Good Fluidity And Wide Processing Temperature Range. It Can Quickly Fill Complex Molds In The

Iron Castings Are Made of Cast Iron As The Main Material, Which Has Wear Resistance, Pressure Resistance And Good Shock Absorption Performance.