LCP (Liquid Crystal Polymer) Has Excellent Fluidity And Low Melt Viscosity, Can Efficiently Fill Complex Thin-Walled Structures, Has A Short Molding Cycle And High Dimensional Stability, And Has Self-Reinforcement Characteristics And Extremely Low Shrinkage. Processing Requires High Temperature Conditions And Strict Mold Temperature Control, But Has A Fast Cooling Rate And Is Suitable For Precision Molding; It Has High Temperature Resistance, Chemical Corrosion Resistance And High Mechanical Strength, And Is Widely Used In Precision Parts In The Fields Of Electronics, Medical Treatment, etc.
Lead Time: < 15 Days
Tolerances: ±0.01mm
Max Part Size: 1500*1500*1000mm
Sample Time: < 3 Days
Surface Finish: Please Contact Us
Standard LCP
(Type III)
Standard LCP (Type III) Is Often Used For Injection Molding Thin-Walled Precision Electronic Components (Such As Connectors) Due To Its Excellent High Temperature Stability And Flow Characteristics. It Can Quickly Fill Complex Structures And Maintain Dimensional Accuracy.
Standard LCP (Type III) Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Rockwell R) |
Heat Deflection Temperature (°C) |
Melting Point (°C) |
|
150-220 |
1.5-3.5 |
100-120 |
260-320 |
280-340 |
