PC Materials Have Good Fluidity During Injection Molding And Can Be Formed Into Complex Structures, But They Have Extremely High Requirements For Temperature Control And Drying To Avoid Bubbles And Internal Stress. At The Same Time, They Retain High Transparency And Impact Resistance, And The Process Adjustment Is More Sophisticated Than That Of Ordinary Plastics.
Lead Time: < 15 Days
Tolerances: ±0.01mm
Max Part Size: 1500*1500*1000mm
Sample Time: < 3 Days
Surface Finish: Please Contact Us
Generic
PC
PC Materials Require High Temperature Molding And Precise Temperature Control During Injection Molding. They Must Be Fully Dried And The Mold Preheated Before Processing. They Are Suitable For The Production Of High-Strength And Heat-Resistant Transparent Or Opaque Products.
General Acrylic Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Shore D) |
Heat Deflection Temperature (°C) |
Glass Transition Temperature (°C) |
|
40-154 |
3-233 |
90-95 |
57.2-208 |
142-152 |
