Acrylic Processing Requires Precise Control Of Temperature And Injection Speed. It Has Good Fluidity At High Temperatures But Is Easily Decomposed Due To Overheating. Avoid Bubbles And Residual Stress. The Shrinkage Rate Is High, And The Mold Design Needs To Compensate For The Shape In A Targeted Manner. At The Same Time, The Cooling Process Must Be Uniform And Slow To Prevent Deformation And Cracking. The Finished Product Has A Bright And Smooth Surface But Is Relatively Brittle, Which Is Suitable For Making Parts With High Transparency Requirements And Fine Structures.
Lead Time: < 15 Days
Tolerances: ±0.01mm
Max Part Size: 1500*1500*1000mm
Sample Time: < 3 Days
Surface Finish: Please Contact Us
Acrylic
Acrylic is injected at high temperature and quickly cooled to make highly transparent and impact-resistant products, which require precise temperature control to prevent deformation.
General Acrylic Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Rockwell R) |
Heat Deflection Temperature (°C) |
Melting Point (°C) |
|
25-85 |
1-85 |
90 |
73-109 |
102-122 |
