Polystyrene (PS) Performs Well In Injection Molding. It Has Good Fluidity And Is Easy To Fill Complex Molds. It Can Be Quickly Cooled And Molded, Making It Suitable For Efficient Mass Production. It Has Low Shrinkage, Strong Stability, And High Gloss, Making It Suitable For Products With Strict Appearance Requirements. The Temperature And Pressure Of Injection Molding Need To Be Controlled To Avoid Cracking Or Internal Stress Problems Caused By Material Brittleness, And The Mold Needs To Optimize The Flow Channel To Reduce Defects.
Lead Time: < 15 Days
Tolerances: ±0.01mm
Max Part Size: 1500*1500*1000mm
Sample Time: < 3 Days
Surface Finish: Please Contact Us
Generic
PS
General-Purpose Polystyrene (PS) Is Often Used Through Injection Molding To Quickly Produce Daily Necessities, Packaging Containers And Other Plastic Products With Simple Structures And Large Batches Due To Its Good Fluidity And Easy Processing.
General PS Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Rockwell R) |
Heat Deflection Temperature (°C) |
Melting Point (°C) |
|
30-50 |
1-3 |
65-80 |
70-90 |
240 |
