ABS Material Is Stable In Injection Molding, Has Moderate Fluidity, Short Molding Cycle, High Yield, And Is Suitable For Mass Production Of Complex Structural Parts. The Temperature Range Must Be Controlled To Avoid Stress Cracking Caused By Overheating Or Too Fast Cooling Of The Material. The Mold Needs To Have A Reasonable Exhaust Structure To Reduce Surface Air Marks Or Weld Marks. The Finished Product Has Good Toughness, Easy Surface Treatment, And Takes Into Account Both Production Efficiency And Product Performance. It Is The Preferred Material With Controllable Comprehensive Cost In Mass Production.
Lead Time: < 15 Days
Tolerances: ±0.01mm
Max Part Size: 1500*1500*1000mm
Sample Time: < 3 Days
Surface Finish: Please Contact Us
General
ABS
During The Injection Molding Process, ABS Material Requires Controlling The Barrel Temperature (200-240°C) And The Mold Temperature (60-80°C). By Maintaining Pressure To Compensate For Shrinkage And Improve Surface Finish, It Is Widely Used In The Molding Of Electrical Housings And Structural Parts.
General ABS Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Rockwell R) |
Heat Deflection Temperature (°C) |
Melting Point (°C) |
|
40.7 |
53.4 |
107 |
97.4 |
267 |
