Nylon Is Easily Affected By Moisture And Must Be Thoroughly Dried Before Use, Otherwise Bubbles Or Surface Defects Will Easily Appear In The Finished Product; It Has Good Fluidity In The Molten State And Can Easily Fill The Details Of Complex Molds, But It Shrinks Significantly When Cooled, Which Can Easily Lead To Dimensional Deviation Or Deformation, So The Mold Design Needs To Reserve Adjustment Space. Nylon Injection Molded Parts Are Brittle When They Are Just Demolded, And Proper Insulation Or Post-Treatment Can Improve Their Toughness. At The Same Time, Its Wear-Resistant And Durable Properties Also Make It Suitable For Manufacturing Parts That Require Long-Term Friction, Such As Gears And Pulleys.
Lead Time: < 15 Days
Tolerances: ±0.01mm
Max Part Size: 1500*1500*1000mm
Sample Time: < 3 Days
Surface Finish: Please Contact Us
Available PA(Nylon) at Dazao: PA6, PA66 etc.
Nylon 6
Nylon 6 Needs To Be Melted At High Temperature And Fill The Mold Quickly. Its Excellent Fluidity And Rapid Cooling Characteristics Make It Suitable For The Production Of Precision Parts Such As Gears And Bearings. It Needs To Be Fully Dried Before Processing To Avoid Moisture-Induced Bubble Defects.
General Nylon 6 Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Rockwell R) |
Heat Deflection Temperature (°C) |
Melting Point (°C) |
|
45-80 |
30-100 |
80-85 |
60-70 |
215-220 |
Nylon 66
Nylon 66 Requires High Temperature And Rapid Molding During Injection Molding. It Must Be Thoroughly Dried To Prevent Bubbles Before Processing. It Is Often Used To Manufacture High Temperature Resistant And Wear-Resistant Precision Engineering Parts Such As Gears And Bearings.
General Nylon 66 Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Rockwell R) |
Heat Deflection Temperature (°C) |
Melting Point (°C) |
|
30-98 |
1-300 |
78-88 |
75-428 |
197-266 |
