Excellent Fluidity And Filling Capacity Make It Suitable For The Production Of Thin-Walled And Complex Structural Parts; Low Melting Point And Heat Capacity Can Reduce Energy Consumption And Extend Mold Life. However, Magnesium Alloy Casting Requires Attention To Oxidation Protection, And The Solidification Shrinkage Rate Is High (About 4-5%), So Defects Need To Be Controlled By Optimizing Mold Design And Shrinkage Feeding System. Its Light Weight Makes It An Important Structural Material In The Automotive And Aerospace Fields, But Its Poor Corrosion Resistance Requires Surface Treatment.
Lead Time: < 15 Days
Tolerances: ±0.015mm
Max Part Size: Please Contact Us.
Available Magnesium at Dazao: Magnesium Alloy AZ91D, AI60B, AS41B etc .
Magnesium Alloy
AZ91D
Magnesium Alloy AZ91D Is Widely Used In Die Casting And Sand Casting Processes. Its Excellent Fluidity And Thermal Cracking Resistance Make It Suitable For The Production Of Complex Thin-Walled Parts. It Is Often Used In Lightweight Fields Such As Automobiles And Electronic Housings. During Casting, Melt Protection And Mold Temperature Must Be Controlled To Optimize Surface Quality And Reduce Porosity Defects.
Magnesium AZ91D Properties
|
Tensile Strength, Yield (MPa) |
Fatigue Strength (MPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
150-160 |
90 |
3-7 |
60-70 |
1.81 |
Magnesium Alloy
AI60B
Magnesium Alloy AI60B Is Widely Used In Die Casting And Sand Casting Due To Its Excellent Fluidity And Low Thermal Cracking Tendency, And Is Particularly Suitable For The Production Of Lightweight Thin-Walled Structural Parts. This Material Exhibits Good Dimensional Stability And Surface Forming Quality In Precision Casting Scenarios Such As Automobile Engine Housings And Electronic Equipment Brackets.
Magnesium Alloy AI60B Properties
|
Tensile Strength, Yield (MPa) |
Fatigue Strength (MPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
160-200 |
70-100 |
5-10 |
70-90 |
1.75-1.8 |
Magnesium Alloy
AS41B
Magnesium Alloy As41B Is Widely Used In High-Temperature Parts Such As Automobile Engine Housings Through Die Casting Or Sand Casting. Its Aluminum-Silicon Composition (4% Al, 1% Si) Optimizes High-Temperature Creep Resistance (150-200°C). This Material Needs To Be Combined With Rare Earth Elements To Refine The Grains, Control The Oxidation Risk During Casting, And Use Surface Coatings To Enhance Corrosion Resistance.
Magnesium Alloy AS41B Properties
|
Tensile Strength, Yield (MPa) |
Fatigue Strength (MPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
140-160 |
70-90 |
3-6 |
60-70 |
1.77-1.8 |
